Filter
Top Products
User Manual
Publication date: July, 2006
Revision A2
164
help
Syntax:
help
Description:
To show available commands.
Some commands are the combination of more than two words. When you enter this
command, the CLI would show the complete commands. Besides, the command
would help you classify the commands between the local commands and the global
ones.
Argument:
None.
Possible value:
None.
Example:
# ip
(ip)# help
------------<< Local commands >>------------
disable dhcp Disable DHCP
enable dhcp Enable DHCP, and set dns auto or manual
set dns Set dns
set ip Set ip and gateway
show Show IP Configuration
------------<< Global commands >>------------
end Back to the top mode
exit Back to the previous mode
help Show available commands
history Show a list of previously run commands
logout Logout the system
restore default Restore default config
restore user Restore user config
save start Save as start config
save user Save as user config
(ip)#