Edimax Technology ES-3124REM Switch User Manual


 
54
2.2 Trunk Configuration
This page can create max to seven trunk groups. You can
arbitrarily select up to four ports from port 1~port 24/port25 ~
port26 to build a trunking group.
1. Select <Edit> on actions menu.
2. Press <Space> key to configure the member port of the trunk
group. Besides, you have to set “Static” or “LACP” for the
corresponding trunk group of TRK1~TRK7 item.
“Static” – the normal trunk.
“LACP” – this trunk group have link aggregation control
protocol.
3. Press Ctrl+A to go back action menu line.
4. Select <Save> to save all configure value.
5. If the item of TRK1~TRK7 is set “Disable”, it means the
trunk group is deleted.
6. All ports in the same static trunk group will be treated as
single port. So when you setting VLAN members and Port
configuration they will be toggled on or off simultaneously.
NOTE: If VLAN group exists, all of the members of static
trunk group must be in same VLAN group.