Edimax Technology ES-3124REM Switch User Manual


 
87
3.6.2 System Configuration
If you enable the IEEE 802.1X function, you can configure the
parameters of this function.
1. Radius Server IP: Set the Radius Server IP address
2. Shared Key: Set an encryption key for use during
authentication sessions with the specified radius server. This
key must match the encryption key used on the Radius
Server.
3. NAS, Identifier: Set the identifier for the radius client.
4. Server Port: Set the UDP destination port for authentication
requests to the specified Radius Server.
5. Accounting Port: Set the UDP destination port for
accounting requests to the specified Radius Server.
There are four types for each port:
Fu, Force unauthorized: The specified port is required to be
held in the Unauthorized state.
Fa, Force authorized: The specified port is required to be held
in the Authorized state.
Au, Auto: The specified port is set to the Authorized or
Unauthorized state in accordance with the outcome of an
authentication exchange between the Supplicant and the
authentication server.
No, None: The specified port is required to be held in the
Authorized state.