Filter
Top Products
Wireless LAN Access Point Configuration
21
Refresh
If you want to get the original setting on the Access Point, pull down the File
menu and select the Refresh submenu.
IP Configuration
Pull down the Setup menu and select the IP Configuration from the Bridge
submenu. You can modify the IP Address and IP Mask through this window
directly. If DHCP is enabled, select the primary port where the DHCP server is
connected.
Filtering Configuration
Pull down the Setup menu and select the Filtering from the Bridge submenu. If
IP Routing is enabled, only the IP protocol packets will pass through the WLAN
and any other protocols will be filtered out.