Filter
Top Products
Introduction
5
USB Port
The USB port which connects to an USB-ready PC is used to configure the
Access Point. To work with USB port, the PC must be running Windows 98, Me,
2000 or XP.
DC Adapter Port
Insert the power jack of the power adapter into this port.
10/100Mbps
This port connects to Ethernet network devices, such as a hub, switch, or router.
Reset
If problems occur with the Access Point, press the Access Point’s reset button
with a pencil tip and the Access Point will re-boot itself immediately.
SMB Antenna Connector
The SMB Antenna Connector is where external antenna is connected to the
Access Point. While external antenna is connected, the internal antenna will be
disabled automatically.