Filter
Top Products
Wireless LAN Access Point Configuration
7
Chapter 3 Wireless LAN Access Point
Configuration
Two software tools are provided to configure the Access Point.
AP Utility
The AP Utility can be used when configuring the Wireless LAN Access Point
through a USB connection and is compatible with Windows 98, Millennium,
2000 and XP.
Access Point SNMP Manager
The Access Point SNMP Manager can be used when configuring the Wireless
LAN Access Point through an Ethernet connection and is compatible with all
Windows Operating Systems. You may also use the SNMP Manager configure
the Access Point wirelessly.
3.1 AP Utility
3.1.1 How to Install the AP Utility
Please run the program “setup.exe” which you will find in the “DFU” subfolder of
the “Utilities” folder in your CD. Follow the instructions of the setup program and
select the directory where the application is installed.
3.1.2 Using the AP Utility
Before using the AP Utility Application, please make sure you have plugged the USB
cable to the Access Point USB port and installed the driver of the Access Point (see
Chapter 2 for the installation) and the AP Utility Application.
On the Start Menu, choose Start->Programs->Atmel Utilities->DFU->DFU to run the
AP Utility Application. Then, select the Configuration button to start configuring.