Filter
Top Products
z The DHCP server startup, which determine if
the PrintSir will act as DHCP server. If this
item is set to Auto, the PrintSir will detect if
there is any other DHCP server on the network
when it boots up. If there is no DHCP server
on the network, then the PrintSir will
configure itself as DHCP server; otherwise it
will disable this function.
z DHCP setting is used to configure TCP/IP
parameters that will be assigned to a DHCP
client. If this item is set to Auto, the PrintSir
will determine all TCP/IP parameters
automatically; otherwise you will configure
the following parameters:
Starting IP: specifies the starting IP address
for assigning to DHCP clients.
IP range: specifies how many IP addresses
are available to DHCP clients.
Net mask: gives the network mask.
Gateway IP: gives the IP address of the
default gateway.
DNS server: gives the IP address of the
domain name server.
102