Filter
Top Products
NOTE: The PrintSir may require up to a minute after
power-up to log into a NetWare Directory Services
context because of the large number of
calculations NDS security requires.
Your PrintSir should now be ready for use by
workstation users. You should be able to redirect printing
to your PrintSir using a CAPTURE command.
5.3.2.2 Configuring as Remote Printer Mode
This remote printer feature is not available for the
10/100Mbps 3-port PrintSir models. Make sure that you
have created the NetWare print server with Type Remote
using PCONSOLE utility before you configure the PrintSir.
For more detailed information about PCONSOLE, please
refer to NetWare‘s manual. You can set up the NetWare
print server, print queue and printer objects by following
the steps below:
1. Run the NetWare PCONSOLE program.
2. Change the current context, if necessary, using
the Change Context menu selection.
3. Choose Quick Setup from the menu.
66