Filter
Top Products
Your PrintSir can operate either in bindery mode or
NDS mode. Bindery mode works with NetWare 3.x servers
and with NetWare 4.x/5.x servers using bindery emulation.
NDS mode works with NetWare 4.x/5.x servers.
NOTE : Though the PrintSir supports both bindery mode
and NDS mode, it cannot support both at the same
time. If you are using both NetWare 3.x and
4.x/5.x servers, you need to set up the PrintSir to
use bindery mode. If you need to install NetWare
4.x/5.x bindary mode network printing, please refer
to the previous chapter. The installation procedure
is the same as NetWare 3.x.
5.3.1 Quick Installation Using “Install” program
The INSTALL program included on the CD-ROM can
be used to quickly set up the PrintSir for use. It can only
be used to set up the PrintSir as Server mode; it cannot be
used to configure the PrintSir as Remote Printer mode. To
use this method,
1. Log in to your NetWare server as ADMIN.
2. Insert the CD-ROM and change to the appropriate
drive and directory. Ex. e:\dosutil\
3. Run the INSTALL program with “NDS” option
E :\dosutil\install /NDS
4. Choose your new PrintSir from the displayed list
and press Enter. The name listed will be the same
as the Device Name printed on a label at the your
PrintSir.
61