Filter
Top Products
58
Lines should be indented with tabs. More than one printer
name can be used, with variants separated by vertical
bars (name1|name2).
The rm= entry should correspond to the IP address you
have assigned to the print server. You can also use a host
name if you have assigned one in the /etc/hosts file.
The sd= entry should correspond to the spool directory
you created in the previous step.
The rp= entry should correspond to the port name of the
remote printer. The values should be one of lpt1, lpt2 or
lpt3 depends on the printer port.
The print server should now be available for printing from
your Unix host.