Edimax Technology Two-console 8 port PS/2 KVM Switch Switch User Manual


 
Keyboard Hot Key Commands:
You can also conveniently command KVM switch to switch ports simple via key sequences.
To send commands to KVM switch, the “SCROLL LOCK” key must be pressed twice
within 2 seconds. You will hear a beep for confirmation and then the keyboard is in hot key
mode. If you have not pressed any key in hot key mode within 2 seconds (It means there is
no keystroke after “Scroll Lock” “Scroll Lock” key ), the keyboard will be back to Operation
System control state.
Below are the different hot key commands (for local KVM):
within 2 seconds
+ + = Previous Channel
Scroll
Lock
Scroll
Lock
+ + = Next Channel
(Note: You also could press “up arrow key” or “down arrow
key” longer time to speed up selecting the destination
port)
Scroll
Lock
Scroll
Lock
+ + = Previous Bank
Scroll
Lock
Scroll
Lock
Page
Up
+ + = Next Bank
To select PC port:
Scroll
Lock
Scroll
Lock
Page
Down
+ + + = Selected Bank and PC
Port No.
01~04 (4 port)
01~08 (8 port)
01~16 (16 port)
Scroll
Lock
Scroll
Lock
Bank
No 1~8
+ + = Beeper on local KVM Switch
(Note: The default Beeper function is ON and beeper
control is only for available for Scan Mode )
Scroll
Lock
Scroll
Lock
B
+ + = Auto Scan
Scroll
Lock
Scroll
Lock
S
To get out of Auto Scan Mode, Press any key or SPACE bar.