Eiki EIP-5000L Projector User Manual


 
23
Projecting a Reversed Image
Projection from behind the Screen
Place a translucent screen between the projector and the audience.
Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page
84.)
Projection Using a Mirror
Place a mirror (normal flat type) in front of the lens.
When the translucent screen is placed between the mirror and audience, set to “Front” in the “PRJ Mode”
menu. (See page
84.)
When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See page
84.)
Info
When using a mirror, ensure that both the projector and the mirror are carefully placed so the projected
light does not shine into the eyes of the audience.
Ceiling-mount Setup
It is recommended that you use the optional EIKI ceiling-mount
bracket for this installation.
Before mounting the projector, contact your nearest EIKI Autho-
rized Dealer or Service Center to obtain the recommended
ceiling-mount bracket (sold separately).
Invert the image by setting “Ceiling + Front” in “PRJ Mode”. See
page
84 for use of this function.
Translucent screen
Audience
Set to “Front”
Audience
Translucent screen
Mirror
Set to “Rear”
Audience
Mirror