Eiki EIP-5000L Projector User Manual


 
45
Switching the Input
Mode
Select the appropriate input mode for the con-
nected equipment.
Press ,
,
,
or on
the remote control to select the input
mode.
When pressing
on the projector, the
input mode switches in order of :
INPUT 1 INPUT 2 INPUT 3
When pressing
on the projector, the
input mode switches between “INPUT 4” and
“INPUT 5”.
Note
When no signal is received, “NO SIGNAL”
will be displayed. When non-supported sig-
nal is received, “NOT REG.” is displayed.
When “Auto Search” of the “Options (1)”
menu is set to “ON”, the input mode with
signal can automatically be detected and
displayed. (See page 78.)
The input mode is not displayed when “OSD
Display” of the “Options (1)” menu is set to
“Level A” or “Level B”. (See page 75.)
About the Input mode
"On-screen Display of Input Mode (Example)
Using RGB
Using
component
INPUT 1/2/3 mode
INPUT 5 mode
Using S-video
INPUT 4 mode
Using video
Used for projecting images from
equipment that sends RGB signals
or component signals connected to
the INPUT 1 or 2 terminals.
Used for projecting images
from equipment connected to
the INPUT 3 terminal.
Used for projecting images
from equipment connected to
the INPUT 4 terminal.
Used for projecting images
from equipment connected to
the INPUT 5 terminal.
INPUT 1/
INPUT 2
(RGB/
component)
INPUT 3
(digital PC
RGB/digital
PC compo-
nent/digital
video RGB/
digital video
component)
INPUT 4
(video)
INPUT 5
(S-video)
INPUT buttons
////
When pressing .
When pressing .
When “Auto Search” is set to “ON”
Pressing or once displays the
current input mode.
Pressing
or again starts the
automatic input search.
* The “INPUT 3”
display is an
example. (When
“Signal Type” is set
to “D. PC RGB”)
* The “INPUT 3”
display is an
example. (When
“Signal Type” is set
to “D. PC Comp.”)