Eiki EIP-5000L Projector User Manual


 
21
Pages 38, 39
4. Adjust the angle
5. Adjust the focus and the zoom
Page 40
8. Turn the power off
7. Select the input mode
11
11
1 Press
on the projector or on the remote control to adjust the focus.
22
22
2 Press
on the projector or on the remote control to adjust the zoom.
Press on the projector or
on the
remote control to select the “INPUT 1” mode.
When pressing
on the projector, input mode switches in order of :
INPUT 1 INPUT 2 INPUT 3
.
Pressing
on the projector switches between “INPUT 4” and “INPUT 5”.
When using the remote control, press
/
/
/ / to switch the input mode.
Press
on the projector or on the remote control. While the confirmation message is displayed, press
or again.
You can unplug the power cord even if the projector is operating.
Even if you unplug the power cord from the AC outlet, the cooling fan continues to run for a while.
Adjust the projector angle
Shift the lens horizontally and vertically.
11
11
1
Press on the projector or
on the
remote control.
22
22
2
Press
', ", \ or |
on the projector or the
remote control.
Adjust the projector angle by rotating the adjust-
ment feet.
6.
Correcting the image distortion due to the projection angle
11
11
1 Press
on the projector or on the
remote control.
22
22
2 Press
on the projector or on the
remote control.
33
33
3 Press ', ", \ or | to move the position for
the upper left of the image.
Page 41
44
44
4 Press
or to set the position.
55
55
5 Repeat the same procedure with the positions
for the upper right, lower right and lower left
of the image.
When the position of the lower left is set, the
correction is made and the display disappears.
""
""
" On-screen Display (RGB)
""
""
" On-screen Display
Page 45
Page 37