Filter
Top Products
LC-NB2UW
30
1
Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select
IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the item that you want to adjust by pressing
the POINT UP/DOWN buttons. To change the value, press
either the POINT RIGHT button or the POINT LEFT button.
Color
Press POINT LEFT button to adjust the image lighter, and press
POINT RIGHT button to adjust deeper. (From 0 to 63.)
Tint
Press POINT LEFT button to adjust the color more purple, and
press POINT RIGHT button to adjust more green. (From 0 to 63.)
White balance (Red / Green I Blue)
Move the arrow to Red, Green, or Blue that you want to adjust.
Press POINT LEFT button to adjust the color of image lighter, and
press POINT RIGHT button to adjust deeper. (From 0 to 63.)
Contrast
Press POINT LEFT button to adjust the image lighter, and press
POINT RIGHT button to adjust deeper. (From 0 to 63.)
Brightness
Press POINT LEFT button to adjust the image darker, and press
POINT RIGHT button to adjust brighter. (From 0 to 63.)
Sharpness
Press POINT LEFT button to adjust the image softer, and press
POINT RIGHT button to adjust sharper. (From 0 to 63.)
Each of the keys operates as follow.
Reset Recalls the data previously adjusted.
Stored Stores the data in the memory.
Quit Closes the PICTURE IMAGE ADJUSTMENT Menu.
NORMAL FUNCTION
The normal picture level is preset on this projector at the factory
and can be restored anytime you press the NORMAL button
(located on the Top Control or on the Remote Control Unit).
The“Normal” display will be displayed on the screen for a few seconds.