LC-NB2UW
36
Problem:
Try these Solution
Remote Control Unit does
not work
• Check the batteries.
• Check the ALL-OFF switch on the Remote Control Unit is set to “ON.”.
• Make sure nothing is blocking between the Remote Receiver and the Remote
Control Units.
• Make sure you are not too far from the projector when using the Remote Control
Units. Maximum operating range is 16.4’ (5m).
Wireless Mouse function
Does not work
• Check the cable connection between the projector and the computer.
• Check the mouse setting on your computer.
• Turn on the projector before your turn on the computer.
WARNING:
High voltages are used to operate this projector. Do not attempt to open the cabinet.