Eiki LC-XNB5M Projector User Manual


 
9
PREPARATION
POSITIONING PROJECTOR
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating
ADJUSTABLE FEET. Projection angle can be adjusted up to 15.6
degrees.
ADJUSTABLE FEET
FEET LOCK
LATCHES
CAUTION
Tilt the projector within the adjustable range in order not to shorten
the life of the lamp. Proper angle should be taken. Refer to page
10.
Lift the front of the projector and pull the FEET LOCK
LATCHES on both sides of the projector.
1
Release the FEET LOCK LATCHES to lock the
ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to
adjust the position and tilt.
2
To retract the ADJUSTABLE FEET, lift the front of the
projector and pull and undo the FEET LOCK LATCHES.
3
Keystone distortion of the projected image can be adjusted by
Menu Operation. Refer to page 20 and 35.
This projector is designed to project on a flat projection surface.
The projector can be focused from 5.3(1.6m) ~ 40.0(12.2m).
Refer to the figure below to adjust a screen size.
40”
100”
160”
200”
300”
230”
153”
115”
77”
31”
H1
H2
40.0 (12.2m)
26.6 (8.1m)
21.3 (6.5m)
13.1 (4.0m)
5.3 (1.6m)
ROOM LIGHT
The brightness in a room has a great influence on
picture quality. It is recommended to limit
ambient lighting in order to provide the best
image.
Max. Zoom
Min. Zoom
Screen Size
(W x H) mm
Zoom (min)
40
Zoom (max)
813 x 610
6.9' (2.1m)
5.3' (1.6m)
100
2032 x 1524
17.4' (5.3m)
13.1' (4.0m)
160
3251 x 2438
27.9' (8.5m)
21.3' (6.5m)
200
4064 x 3048
34.8' (10.6m)
26.6' (8.1m)
300
6096 x 4572
–––––
40.0' (12.2m)
31"
630 x 472
5.3' (1.6m)
–––––
H1 : H2 = 9 : 1