Filter
Top Products
- 19 -
Controlling the Projector
Using control features of the projector
To control a projector the NetControl software has to be connected to a projector. If you
are not connected to a projector all control buttons are deactivated. If the NetControl
software is connected to a projector you receive direct feedback from the projector’s
screen after pressing a function button.
Selecting different inputs
Click the Input Select button in the control window. The Input Control Center window
pops up.
Select a valid input. If the projector is connected to a video or data source the input will
be switched to that specific input source. Most projectors need some time to recognize
the new input signal. Switching to a different input can take between 1 and 2 seconds.
manual.pmd 3/18/2003, 6:32 PM19