Filter
Top Products
DESIGN Brick 70™
©Elation Professional, Los Angeles Ca. 27 www.ElationLighting.com
Program” submenu. See page 18 for the menu breakdown. Once in the
“Auto Program” submenu select “Alone”
For functionality that chases to sound: Access the “Function” menu and
select the “Music Control” function, this will give you access to the “Music
Control” submenu. See page 18 for the menu breakdown. Once in the
“Music Control” submenu select “Alone”
10.2 Master/Slave Operation (Auto Program or Music Control): This function allows
up to 16 fixtures to be linked together to provide a synchronized light show without
the use of a controller. Only use this when linking several Design LED Brick 70s
™
together for use without a controller. Any fixture can act as a “Master or a “Slave.”
Using XLR DMX cables, daisy chain your fixtures together via the XLR
connectors. Remember the Male XLR connector is the input and the Female
XLR connector is the output. The first fixture in the chain (master) will use
the female XLR connector only - The last fixture in the chain will use the
male XLR connector only. For longer cable runs we suggest a terminator at
the last fixture.
For the unit functioning as the “Master” unit follow the same procedures
listed in the previous Stand-Alone section.
For the “Slave” units, access the “Set To Slave” settings in the “Function
Mode” menu and assign each slave fixture a designation (Slave 1, Slave 2,
Slave 3…etc).
10.3 Universal DMX Control: This function allows you to use a universal DMX-512
controller such as the Elation® Show Designer 2
™
or Elation® Show Designer 3
™
to
control head movement, the color wheel, the shutter (strobe), and all other DMX
traits. A DMX controller allows you to create unique programs tailored to your
individual needs. The Design LED Brick 70
™
uses up to 35 DMX channels. See
page 32 for detailed description of the DMX traits. To control your fixture in DMX
mode, follow the set-up procedures on pages 11-17 as well as the set-up
specifications that are included with your DMX controller. Use the controller’s faders
to control the various DMX fixture traits. This will allow you to create your own
programs.