Filter
Top Products
15
Connection to Monitor and Projector
The following settings of this product can be switched with the DIP switch. Switch the settings
according to the connection environment. The factory settings are as shown in the following
table:
Be sure to turn OFF the power supply to all equipment before making any connections to
protect this product and all the connected equipment.
When switching the DIP switch key, be sure to turn OFF the power supply to this product
beforehand.
4 SETTING UP AND CONNECTION
Key
A
B
To switch the Video output type
To switch the screen size of Video output
Function Key selection
Initial setting
NTSC
Over scan
0
0
Content
1
2
3
4
5
6
7
8
9
10
11
Setting Up
(1) Unfold the lamp arms fully until they come to the
deadend.
Unfold in the sequence specified in the drawing
shown to the right.
(2) Press the column lock button, and raise the
column until the column lock button returns to
the original position. Make sure that the column
has been completely locked.
(3) Turn the camera head until the lens faces to the
stage.
(4) Plug the power cord into the power cord
receptacle of this product and the AC outlet.
1
2
3
4
5