Filter
Top Products
31
1
2
3
4
5
6
7
8
9
10
11
Image Memory
Images can be stored / called in the memory of this
Presenter (max. 8 sheets).
1. How to store images
Press the
[IMAGE
.
SET] button on the wireless
remote control and press the [MEMORY NO.]
button of the wireless remote control within "4 sec
or less", then the image is stored in the pressed
number.
When the power of the Presenter is turned OFF,
the image stored in the memory is deleted.
2. How to read out stored images
Press the [IMAGE
.
CALL] button on the wireless
remote control and press the [MEMORY NO.]
button of the wireless remote control within "4 sec
or less", then the image in the memory correspond
to the pressed number is read out.
If the [MAIN] button in the input selection area is
pressed, the camera captured image is displayed
again.
Images can not be stored into the number in which
image is being read.
F.A.M. (Frame Accumulate Mode)
This is used to reduce roughness noise of the image, and is appropriate to take pictures of still
objects. Press the [F.A.M.] (Frame Accumulate Mode) button on the front panel, and the
indicator lamp goes ON, and the clear mode is selected.
Press the [F.A.M.] (Frame Accumulate Mode) button again, and the indicator lamp goes
OFF, and the normal status is resumed.
When the image is rotated, the clear mode does not function.
Installation of LCD Monitor
To install the LCD monitor (LM-5011N) available
separately, the LCD monitor mounting metal piece
(MS-201) available separately is required.
The LCD monitor (LM-5011N) and the LCD monitor
bracket (MS-201) are available on option, and not
attached to this Presenter (HV-5100XG).
PAUS E
LAMP
POSI/NEGA COLOR/B&W
IRIS
AF
2x
SET
RGB1 RGB2
NORMAL OPEN CLOSE
PRESET
CALL
TELE
ZOOM
MAIN
MONITOR
OUTPUT
WIDE
NEAR
FOCUS
FAR
UPPER BASE
SET
IMAGE
CALL
LCD monitorLCD
monitor
mounting
metal
piece
Wireless remote control