Filter
Top Products
Chapter 3 91
Replacing the Modem Module
2. Ensure that the Mainboard is face up (the Heatsink and CPU are not visible). Place the Mainboard in the
chassis, left side first (1), and press down to install (2).
NOTE: Make sure the I/O ports are positioned correctly through the lower cover, and the screw sockets are
visible through the mainboard.
3. Replace the single securing screw. 4. Press down on the DC IN cable to secure the
adhesive in place.
1. Connect the Modem cable to the Modem Module
as shown.
2. Replace the Modem Module and secure the two
screws as shown.
1
2