Filter
Top Products
104 Chapter 3
Replacing the WLAN Module
Replacing the DIMM Modules
NOTE: To replace DIMM Module 2, first remove DIMM Module 1. In this procedure, only DIMM Module 1 is
shown.
1. Insert the WLAN board into the WLAN socket. 2. Replace the two screws to secure the module.
3. Connect the two antenna cables to the module.
NOTE: The white antenna cable connects to the upper terminal and the black antenna cable to the lower
terminal.
1. Insert the DIMM Module in place. 2. Press down to lock the DIMM module in place.