Filter
Top Products
www.emachines.com
11
Setting up the optional speaker bar
Installing the speaker bar
To install the speaker bar:
1 Tilt the screen back, then center the speaker bar below the screen. Make sure that the
speakers face forward.
2 Tighten the two thumbscrews on the back of the speaker bar.
3 Connect the speaker bar’s USB power cord to any available USB port on your computer.
4 Connect the speaker bar’s headphone (green) and microphone (pink) cables to your
computer’s headphone and microphone jacks.
5 If your computer is not already on, turn it on.
Tip (19-inch model)
When using the optional speaker bar, we recommend that you use the
included right-angle VGA cable for the video connection so the speaker bar does not
obstruct the cable. In the United States, if you are using a DVI connection, you can
order a right-angle DVI cable from www.gateway.com
.
Power/Volume control
Power indicator
Kensington lock slot
Headphone jack
Bass port (for bass sound. Do not block.)
Bass port (for bass sound. Do not block.)
Microphone jack Headphone jack