Filter
Top Products
Using Your eMachines Flat-Panel Monitor
4
Connecting video inputs
To connect video sources to your monitor:
1 Position your computer and the monitor so you can reach the back of each.
2 If your computer has a digital video connector (DVI), connect a DVI video cable (not included)
to the white connector under the back of the display. The DVI jack is only available on the
19-inch model. In the United States, you can buy a DVI video cable from www.gateway.com
.
- OR -
Connect the blue VGA video cable to the blue VGA video connector under the back of
the display. (The appearance of your cable and connector may vary from that shown.)
3 Make sure that your computer is turned off, then connect the other end of the video cable
to the matching video port on the back of your computer.
Tip (19-inch model)
When using the optional speaker bar (described in “Setting up the optional
speaker bar” on page 11), we recommend that you use the included right-angle VGA
cable for the video connection so the speaker bar does not obstruct the cable. In the
United States, if you are using a DVI connection, you can order a right-angle DVI cable
from www.gateway.com
.