Filter
Top Products
18
EMC Departmental Switch DS-xxB2 Into Third-Party Racks
Installing the DS-xxB2 Switch
Installing the Switch in the Rack/Cabinet
To install the switch in the rack/cabinet:
1. Lift and orient the switch so that the fan end is to the front of the
rack/cabinet.
2. Align the bracket on each side of the switch with the “C” channel
on each fixed rail.
3. Push the switch into the rack/cabinet until the hole in the front
part of each bracket (the “L”-shaped end) aligns with the hole on
the fixed rail.
Figure 16 Placing the Switch Into the Rack/Cabinet
4. Secure the brackets to the rails with two M3 x 8-mm pan-head
screws (see Table 5 on page 6), one on each side, (Figure 17 on
page 19).
EMC2049S