Filter
Top Products
10
10kVA
Liebert GXT2
UPS
10kVA
Liebert GXT2
UPS
10kVA
Liebert GXT2
UPS
PD-20X
Parallel
POD
Parallel POD
Standard Features Offer
Greater Overall Value
Flexibility:
■
Adapts existing Liebert GXT2 10
kVA UPS to a redundant power
configuration.
■
Power output options enable use
with a wide variety of IT equipment.
■
Installs in a rack or on a wall.
Higher Availability:
■
Eliminates single point of failure
when configured for redundancy.
■
Allows two units to be paralleled
for capacity, and a third added for
redundancy.
Lowest Total Cost Of Ownership:
■
Upgrades your existing Liebert
GXT2 10 kVA UPS investment,
retaining the value of your initial
investment.
■
Saves floor space and integrates
with existing rack environment.
■
Provides the same warranty as
the UPS.
PD-201
Output: (4) 5-20R,
T-type (4) L6-20R
PD-202
Output: (4) 5-20R,
T-type (4) L6-30R
The Parallel POD will require
start-up purchase for each
GXT2-10000RT208 connected
to the system.
Parallel
Communication
Ports
Electronic
equipment may
be installed at the
front of the rack,
with the Parallel
POD installed at
the back of the
rack, increasing
usable space.
Equipment
shown from
back of rack.
Input/Output
Power For
Paralleled UPS
Units
Increase The Flexibility Of Your Liebert
GXT2 10 kVA UPS: Add Capacity Or
Redundancy As Your Needs Grow
Many IT managers are finding a need to increase the
capacity of their rack-mounted UPS. With the Parallel
POD power output distribution system, you can add
capacity or redundancy at any time, without losing
your investment in your Liebert GXT2 10 kVA UPS.
The Parallel POD enables paralleling of two Liebert
GXT2 10 kVA UPS modules to double capacity to 20
kVA. A third unit may be added to configure the
system for N+1 redundancy, raising system reliability.
168997_SL23172:15615 govern 7/22/08 2:29 PM Page 11