Emerson 10 kVA Power Supply User Manual


 
12
A New View On Configuring Your UPS
Each Liebert GXT2 6 kVA
and 10 kVA system is shipped with
Windows
®
compatible software that
allows the user to program a variety of
operating parameters. This capability
allows you to customize the system’s
performance to your specific
requirements, providing a new level of
power protection control and
adaptability.
The software allows
configuration of
the following:
Output voltage selectable.
Enable or disable auto restart.
Select frequency converter mode:
60Hz input/50Hz output with
no derating, bypass is disabled.
50 Hz input/60 Hz output with
no derating, bypass is disabled.
Change the low battery warning
from the standard two minutes.
Select how often you want the
automatic battery test to occur.
Disable automatic battery test
if necessary.
Program the UPS for the number
of external battery cabinets
connected, allowing the UPS
to report the correct run time.
Communications For Power Monitoring And Control
The Liebert GXT2 6 kVA and 10 kVA systems offer a variety of communications
options to provide the monitoring and control capabilities demanded by
today's network computing systems. Operation can be monitored using:
Liebert MultiLink™ Automated System Shutdown Software
Liebert Nform™ Monitoring System
Liebert Universal Monitor And Remote Power
Monitor Panels
Third-Party Monitoring Systems
Liebert IntelliSlot
Web Card
Liebert IntelliSlot
Web Card
For enhanced UPS communications and
control, the Liebert IntelliSlot Web Card
will deliver SNMP and web-management
communications capability to a Liebert
GXT2 unit. This feature will provide
flexibility in how you monitor and control
your UPS over the network. The card is
also easily configurable to work in a
standard SNMP implementation and with
Liebert MultiLink shutdown software.
168997_SL23172:15615 govern 7/22/08 2:29 PM Page 13