Emerson 208 Power Supply User Manual


 
Installation
10
5. Once the UPS is in the desired location, adjust the leveling feet to secure its position.
2.2.2 Stationary Mounting
Additional stability can be added by bolting the mounting brackets (used in shipping) to the floor, as
shown below left.
For greater stability, use a higher-grade bolt. Refer to the dimensions above right when drilling holes
for stationary mounting.
1/2" (13mm)
28"
(711mm)
5/16" (7.94mm)
diameter - in six
places
Optional Stationary
Mounting Dimensions
Center Line
4.75"
(120mm)
4.75"
(120mm)
Shipping Brackets Used
for Stationary Mounting