Filter
Top Products
3-2 Series 300 ATSs Connectity Module
Device Configurator Screen for Series 300 ATSs with a PM or DPM
If a Power Manager (PM) or a Digital Power Meter (DPM) is used with a Series 300 ATS, a button appears on the
lower left corner of the Connectivity Module Device Configurator screen. Press the Config PM button to display
the Power Manager or Power Meter Configuration screen (right side).
Power Manager or Power Meter Configuration
Enter or change the PM or DPM Name (8 char. max.) and Location (20 char. max.). Several configuration settings
must be set appropriately. Press the Update button when finished to save the PM or DPM configuration changes.
Input Name & Output Names (Power Manager only)
For a Power Manager, press the Config I/O Name button to display the Input Name and Output Name screen.
Enter or change the names (16 char. max.) of the inputs and outputs. Press the Update button when finished to save.
Input names
Input & Output Names (PM only) PM or DPM Configuration
Press Update button when
finished to save the names.
Press Update button when finished
to save the confi
g
uration chan
g
es.
Press Config I/O Name button to
display Input & Output Names screen.
Press To PM Config button to return to
Power Mana
g
er Confi
g
uration screen.
Output names
Power Manager
name
Power Manager
location
NOTE
Update the PM, DPM, or Group 1
Controller first
if you need to update
the server. Do not close the browser
during the updating process. The PM,
DPM, or CP update request will be
discarded if the browser is closed.
Power Manager
Power Meter
Power Meter
name
Power Meter
location
Press Update button when finished
to save the confi
g
uration chan
g
es.