Emerson U/300/S/6P Power Supply User Manual


 
Chapter 4 Operator Control And Display Panel 33
HIPULSE U UPS Single Module And “1+N” (Expandable) 160/200/300/400kVA User Manual
4.2.2 Primary Screen
After the UPS starts and finishes system test, the primary screen will appear, as shown in Figure 4-5. For details
about the primary screen, refer to 4.1.5 Detailed Description Of Menu Items.
F2
F4
HELPF1 F3
12:30:36
Unit #1 Normal
?
Bypass
Main
Vphase V
Iphase A
Freq. Hz
Vline V
P. F.
A(AB)
220
20.5
50.1
380
0.99
B(BC)
220
20.5
50.1
380
0.99
C(CA)
220
20.5
50.1
380
0.99
Output
Input Breaker Closed 10-12 12:28:16
Manual Turn On 10-12 12:30:06
UPS in Normal Mode 10-22 12:30:16
200kVA-3X3
HIPULSE U
2006-01-01
Figure 4-5 Primary screen
4.2.3 Default Screen
During UPS operation, if there is neither an alarm nor a keypad operation within two minutes, the default screen will
appear, as shown in Figure 4-6. Two minutes later, the LCD backlight will turn off. When an alarm occurs or a key is
pressed, the primary screen will return, and the LCD backlight will turn on.
The LCD will also return to the primary screen when pressing any menu key at the default screen.
HIPULSE U
2006-01-01
12:30:36
200kVA-3X3
Unit #1 Normal
Press any key, back to main menu.
F2 F4 HELPF1 F3
Figure 4-6 Default screen
4.2.4 Help Screen
At the primary screen, use the HELP key to display the help screen, as shown in Figure 4-7. This screen describes
current meanings of the menu keys to help you with the menu operation. Pressing the HELP key exits the help
screen and returns to the primary screen.