Filter
Top Products
23
Reference Manual
00809-0100-4052, Rev AA
Section 4: DeltaV Ready
April 2015
DeltaV
™
Ready
Figure 4-2. Assign WirelessHART Devices to DeltaV I/O Channel
Assign wireless device tags using the following procedure:
1. Drag and Drop WirelessHART device from the Unassigned Wireless HART Devices: list to
the Channels: list.
2. Repeat this process for each wireless device until all have been assigned.
3. Select OK to continue.
Next the Gateway will need to be assigned to a DeltaV Controller and download all. Assign and
download the Gateway using the following procedure:
1. Right click on the Gateway and select Assign…
2. Use the browse window and select the desired controller.
3. Select OK to close the assignment window.
4. Right click on the Gateway and select Download.
5. Follow the download dialog.
6. Select OK to close the download window.