Filter
Top Products
2-42 Chapter 2
Shielded Twisted-Pair STP Connection
1) Connect one end of the STP cable to the printer server STP port.
See appendix for STP pinout details.
2) Connect the other end of the STP cable to the Token Ring network.
3) Do not connect anything to the printer server UTP port.
Peripheral Connections
Parallel Port
The parallel port provides a female DB25 connector and supports the
following types of peripherals:
• A printer or plotter supporting a Centronics parallel port
• A printer or plotter supporting the bi-directional parallel interface
(IEEE 1284)
NOTE: The parallel cable between the printer server and
the printing device should not exceed 12 feet (3.65
meters).
Figure 2-24: Peripheral Connections