Filter
Top Products
PPPoE Mode
Items Information
PPPoE Username and
Password
Fill in the User Name and Password that provided
by your ISP. The default username/password is
USERNAME/PASSWORD.
Set DNS server
If your DNS provide by ISP is dynamic, choose
“Automatically”, if not, choose “Manually” and enter
the DNS provided by your ISP in DNS 1, 2.
PPPoE MTU
To enable the Maximum Transmission Unit of
Router setup. Any packet over this number will be
chopped up into suitable size before sending.
Larger number will enhance the transmission
performance.
Enter your MTU number in the text-box to set the
limitation (default 1492 bytes).
Host Name
Name of this device.
Ping form WAN
Mark the check box to enable others detecting this
device from WAN, and clear the checkbox to
disable.
WAN Ethernet MAC
Select to use the following MAC as the MAC while
serving Internet:
Original MAC: the MAC of the device.
Manual Settings: the MAC of your computer. Click
on the words in the bracket to clone your computer
MAC in the blank. You can also change the MAC
numbers if you need.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
12