Filter
Top Products
2103 Modem Module
Section 4 2103G Cellular Modem Module
4-6
4.4 Connecting to
Flowlink
The instructions for connecting to Flowlink that are in Section
2-5 apply to the 2103
G. However, for the 2103G, you may also
need to set up a Wireless Power Control schedule.
Note
This section only applies to CSD operation, and requires the
appropriate cellular service and SIM card.
Select the Wireless Power Control tab (Figure 4-6) and click on
the Set Wireless Schedule button to set up a schedule.
Figure 4-8 Wireless Power Control screen
In the Wireless Schedule screen (Figure 4-7), enter the type of
schedule and its start and stop times. Press OK when done.
Figure 4-9 Wireless Power Schedule screen