Filter
Top Products
2103 Modem Module
Appendix C Material Safety Data Sheets
C-2
*Optional Indicating Silica Gel
Material Safety Data Sheet
Indicating Silica Gel
Identity (Trade Name as Used on Label)
Manufacturer
:
MULTISORB TECHNOLOGIES, INC.
(formerly Multiform Desiccants, Inc.)
MSDS Number* : M75
Address:
325 Harlem Road
Buffalo, NY 14224
CAS Number* :
Phone Number (For Information):
716/824-8900
Date Prepared:
July 6, 2000
Emergency Phone
Number:
716/824-8900
Prepared By* :
G.E. McKedy
Section 1 - Material Identification and Information
Components - Chemical Name & Common Names
(Hazardous Components 1% or greater; Carcinogens 0.1% or
greater)
%* OSHA
PEL
ACGIH
TLV
OTHER LIMITS
RECOMMENDE
D
Silica Gel SiO
2
98.0 6mg/m
3
(total dust)
10mg/m
3
(total dust)
Cobalt Chloride >2.0 0.05mg/m
3
(TWA cobalt
metal dust &
fume)
.05mg/m
3
(Cobalt, TWA)
Non-Hazardous Ingredients
TOTAL
100
Section 2 - Physical/Chemical Characteristics
Boiling
Point
N/A
Specific Gravity
(H
2
0 = 1)
2.1
Vapor Pressure
(mm Hg and Temperature
N/A
Melting
Point
N/A
Vapor
Density
(Air =1)
N/A
Evaporation Rate
(__________=1)
N/A
Solubility
in Water
Insoluble, but will adsorb moisture.
Water
Reactive
Not reactive, but will adsorb moisture.
Appearance
and Odor
Purple crystals, no odor.
Section 3 - Fire and Explosion Hazard Data
Flash Point and
Methods Used
N/A
Auto-Ignition
Temperature
N/A
Flammability Limits in
Air % by Volume
N/A
LEL UEL
Extinguisher
Media
Dry chemical, carbon dioxide and foam can be used.
Special Fire
Fighting Procedures
Water will generate heat due to the silica gel which will adsorb water and liberate heat.
Unusual Fire and
Explosion Hazards
When exposed to water, the silica gel can get hot enough to reach the boiling point of water. Flooding with
water will reduce the temperature to safe limits.
Section 4 - Reactivity Hazard Data
STABILITY
Stable
Unstable
Conditions
To Avoid
Moisture and high humidity environments.
Incompatibility
(Materials to Avoid)
Water.
Hazardous
Decomposition
Products
Carbon dioxide, carbon monoxide, water
HAZARDOUS POLYMERIZATION
May Occur
Conditions
To Avoid
None.