Energizer EN1100 Power Supply User Manual


 
13
Best use of Battery Power
Make sure any appliances are energy efficient and turned off after use.
Use Compact Florescent Lamps. Wherever possible, charge with Solar
Panels or Wind Generators. Do not allow lead acid batteries to remain
discharged for long periods of time, they lose capacity (amp hours).
Disposal / Recycling of Inverter / California Proposition 65
Electronic products are known to contain materials that are toxic if
improperly disposed. Contact local authorities for disposal and recycling
information.
This inverter is certified to be “lead free.” Transformers in this inverter
contain nickel composites. Nickel is a known neuro-toxin if ingested.
Troubleshooting
PROBLEM: No Input Voltage
Reason Solution
Poor contact with battery
terminals.
Shut down inverter and
disconnect. Clean terminals
thoroughly and reconnect.
Blown DC battery fuse(s).
Turn off inverter. Fix problem.
Replace fuse(s) with same type
and rating.
PROBLEM: Inverter is Shut Down
Reason Solution
Battery voltage below 10
Volts.
Charge or replace battery.
Inverter is too hot (thermal
shut down mode). Will be
indicated on LCD panel.
Allow inverter to cool. Check
for adequate ventilation. Re-
duce the load on the inverter
to rated continuous power.
Unit may be defective.
See warranty and call
customer service.