Filter
Top Products
Factory Defaults
Accessing Local Management 3-5
You should assign a new administrator password, record it and put it in a safe place for future
reference.
To assign a new password, start at the Main Menu, select Management Setup Menu /Console
Login Configuration, and enter a new password for the administrator. Passwords can consist of up
to 11 alphanumeric characters and are not case sensitive.
3.4 FACTORY DEFAULTS
Table 3-1 lists the default settings for switch configuration parameters. Each parameter can be
changed via the console menus or Telnet.
NOTE: A user is allowed three attempts to enter the correct password; on the third
failed attempt, the current connection is terminated.
Table 3-1 Factory Default Settings
Parameter Default Value
Multicast Filtering
IGMP Multicast Filtering Disabled
Port Configuration
Speed and Duplex
Admin
Auto
Enabled
Port Priority
Default Ingress User Priority 0