Filter
Top Products
Configuring the Serial Port
6-8 Management Setup Menu Screens
6.3 CONFIGURING THE SERIAL PORT
You can access the on-board configuration program by attaching a VT100 compatible device to the
switch’s COM port. (For more information on connecting to this port, refer to Chapter 2.) The
communication parameters for this port can be accessed from the Serial Port Configuration screen
(Figure 6-6) shown below and described in the following table.
Figure 6-6 Serial Port Configuration Screen
Management Mode : CONSOLE MODE
Baud rate : 9600
Data bits : 8
Stop bits : 1
Parity : NONE
Time-Out (in minutes) : 10
Auto Refresh (in seconds) : 5
<SAVE> <RETURN> <CANCEL>
3583_14