VLAN Port Configuration Screen
802.1Q VLAN Configuration Menu Screens 8-17
Field Descriptions
Refer to Table 8-5 for a functional description of each screen field.
8.7 VLAN PORT CONFIGURATION SCREEN
When to Use
To see and/or make changes to the port parameters affecting
• the Port VLAN Identification (PVID) to reassign the port to a different PVID,
• the acceptable frame type that the port will transmit or receive frames of VLANs other than the
static VLANs created on the switch,
• the ingress filtering on the port, which can be enabled or disabled to filter out (drop) frames that
are not on the switch egress list, or
• the GARP VLAN Registration Protocol (GVRP) status, which can be enabled or disabled.
Table 8-5 Current VLAN Egress Configuration Screen Field Descriptions
Use this field… To…
Port
(Read-Only)
See a list of the ports associated with the VLAN ID shown in the line
above the Port and Egress lists.
Egress
(Read-Only)
See the current egress setting (UNTAGGED, TAGGED, or NO) for
each port.