Support User Manuals

Enterasys Networks 9033989-06 Switch User Manual

Open as PDF

of 90

Gaining Access to Memory Modules

B-10 Mode Switch Settings and Option Installations

DIMM Replacement Procedure

IntheeventthattheDIMMneedstobereplaced,thefollowingsectionsexplainhowto

removeandinstalltheDIMM.Ifyouhavequestionsconcerningthereplacementofthe

DIMM,referto“GettingHelp”onpage xviiifordetailsonhowtocontact

Enterasys Networks.

Removing the DIMM

ToremovetheexistingDIMM,proceedasfollows:

1. Removeandsavethesevenscrewsattachingthesafetycovertothestandoffsonthe

mainPCboard.

2. LocatetheDIMMconnectoronthemainPCboard.ReferbacktoFigure B‐2forthe

DIMMlocationonthe4H4285‐49.

3. Pushtheconnectorarms

awayfromtheDIMM,asshowninFigure B‐7,and

simultaneouslylifttheDIMMenoughtoreleaseitfromtheconnectorfingers.

Figure B-7 Removing the Existing DIMM

4. RotatetheDIMMupwards,thenremoveitfromtheconnectorfingers.

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones

de seguridad para evitar descargas de electricidad estática.

1 Connector arms 2 DIMM 3 Connector fingers

À

À

Á

Â

previous next