Filter
Top Products
Installing the 9E312-12 Module
2-6
Setting the 9E312-12 Module DIP Switch
The DIP switch on the 9E312-12 Module (Figure 2-4 and Figure 2-4), is an eight
switch DIP located on the top left corner of the module. Each switch is set
according to the functions described in Table 2-2.
If switch settings are changed, the processor on the module must be reset by using
the reset switch or repowering the module for the changes to take effect.
Figure 2-5. 9E312-12 Module DIP Switch location
1
2
3
4
5
6
7
8
i 960
SMB 1
Prom
BOOT
PROM