Support User Manuals

Enterasys Networks C2RPS-CHAS2 Power Supply User Manual

Open as PDF

of 34

Installing C2RPS-PSMs

SecureStack C2 Installation Guide 2-3

Figure 2-1 C2RPS-PSM Installation

Replacing an Installed C2RPS-PSM

ToreplaceaPSMinstalledinanoperatingsystem,proceedasfollows:

1. UnplugtheACpowercordofthePSMfromtheACpowersourcefirst,thenfromthe

rearofthePSM.

2. LoosenthecaptivescrewssecuringthePSMuntilitisreleasedfromthechassisfront

panel.

3. PullthePSM

outandremoveitfromthechassis.

4. Repeatsteps1through3foreachadditionalPSMyouplantoremove.

1 C2RPS-CHAS2 chassis 3 Chassis power supply slot

2 C2RPS-PSM power supply module 4 Captive screws (2)

C2RPS-CHAS2

C2RPS-PSM

Power

Ã

Ã

À

Â

Á

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones

de seguridad para evitar descargas de electricidad estática.

previous next