Filter
Top Products
Using LANVIEW
Matrix DFE-Gold Series PoE Module 4H4285-49 Installation Guide 4-3
Viewing the PoE Port Status
Ifthe4H4285‐49isinstalledinanN5chassisorisreceiving48Vdcfromanexternal
N‐POEPowerSystemtosupportconnectionstoPDs(PoweredDevices),youcanviewthe
powerstatusindicationsontheRXandTXLEDs.However,onlyonegroupof12ports
maybe
viewedatatime.ToviewthePoEportstatus,refertoFigure 4‐1andproceed as
follows:
1. PresstheGROUPSELECTbuttonformorethentwosecond.The4H4285‐49willenter
thePoEportstatusmodeandthePoELEDturnsgreen.
2. Now,everytimeyoupresstheGROUP
SELECTbuttonforlessthanasecond,the
GROUPLEDlightsupinsequence,indicatingwhichGroupisselected.ThePoE
POWERSTATUSforthatgroupofsegmentsisthenindicatedbytheRXandTXLEDs
foreachsegment.Ifthereispowerattheport,theRXLEDis
greenandtheTXLEDis
off.Otherwise,refertoTable 4‐1fortroubleshootinginformation.
3. PresstheGROUPSELECTbuttonagainformorethantwosecond.Thisreturnsthe
4H4285‐49tothedefaultstatusmodetomonitorRX(receive)andTX(transmit)
activityandthePoELEDturnsoff.
Table 4
‐1describestheLEDindicationsandprovidesrecommendedactionsas
appropriate.
Note: The terms flashing, blinking, solid, and Alternately used in Table 4-1 indicate
the following:
Flashing indicates an LED is flashing randomly.
Blinking indicates an LED is flashing at a steady rate (approximately 50% on, 50% off).
Solid indicates a steady LED light. No pulsing.
Alternately indicates an LED is flashing at a steady rate other than 50% on, 50% off.
Table 4-1 LANVIEW LEDs
LED Color State Recommended Action
MGMT Off Off. This module is NOT the
Management Module.
None.
Green Solid. This module is the
designated Management
Module.
None.
Amber Flashing. This is a
temporary indication that the
module is saving data.
None.