Connecting to COM Port for Local Management
Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 3-23
Connecting to a Modem
ToconnectamodemtoanEnterasys NetworksDFEmoduleCOMport(Figure 3‐11),use
aUTPstraight‐throughcablewithRJ45connectorsandanRJ45‐to‐DB25maleadapter,
andproceedasfollows:
1. ConnecttheRJ45connectoratoneendoftheUTPstraight‐throughcable
totheCOM
portofthemodule.
2. PlugtheRJ45connectorattheotherendoftheUTPstraight‐throughcableintothe
RJ45‐to‐DB25modemadapter.
3. ConnecttheRJ45‐to‐DB25adaptertothecommunicationsportonthemodem.
4. Turnonthemodem.
5. WithaPCconnectedtoaremotemodem,
youcanconfiguretheswitchremotely.To
accomplishthis,youmustconfigureyourPCVTemulationpackagewiththe
followingparameters.
6. Whentheseparametersareset,theLocalManagementpasswordscreenwilldisplay.
RefertotheEnterasysMatrixDFE‐GoldSeriesConfigurationGuideforfurther
information.
Parameter Setting
Mode 7 Bit Control
Transmit Transmit=9600
Bits Parity 8 Bits, No Parity
Stop Bit 1 Stop Bit