Support User Manuals

Enterasys Networks A2H254-16 Switch User Manual

Open as PDF

of 80

Using the Reset Password Button

4-8 Troubleshooting

Using the Reset Password Button

IfyouforgettheSecureStackA2loginpassword,usetheResetPasswordbuttonas

describedinthefollowingprocedure.

Figure 4-2 Reset Password Button

ToresettheSecureStackA2password,refertoFigure4‐2andproceedasfollows:

1. Press‐and‐holdtheResetPasswordbuttonwhiletheswitchisoperational.This

changeoftheloginpasswordtothedefaultpasswordwillbeindicatedviaLocal

ManagementCLIonly.ThisinformationwillnotshowupinaTelnetsession.

2. Logontoswitchmanagement.Youcannowlog o ntotheswitch

viatheConsoleport

andassignanewpasswordusingthecommandlineinterface(CLI).

3. To accessswitchmanagementfromyourloca lPC, terminal,ormodemconnection,

refertotheSecureStackA2ConfigurationGuideforinstructionsonhowtologinand

enteranewpassword.Theguideisavailableonline

undertheScategoryfor

Securestackat:

http://www.enterasys.com/support/manuals

Ifyourequireassistance,contactEnterasysNetworksusingoneofthemethodsdescribed

in

“GettingHelp”onpage1‐6.

1 Reset Password button

Note: Notify the system manager before changing the password.

Console

CPU

RPS

MGR

À

previous next