Filter
Top Products
8
EpsonNet WinAssist
The EpsonNet WinAssist program lets you configure the print
server using Windows XP, Me, 98, NT 4.0, or 2000. This section
includes system requirements and installation instructions. See
the online Administrator’s Manual for complete instructions on
using EpsonNet WinAssist.
System Requirements
Installing EpsonNet WinAssist
Before you install the software, make sure you set up the required
protocols and services in your operating system. If you install
EpsonNet WinAssist before you add or delete protocols or
services, the software may not work. You may need to uninstall
and then reinstall it. See the online Administrator’s Manual for
more information.
Follow these steps to install EpsonNet WinAssist:
1. Insert the CD-ROM in your drive. You see the EPSON
Installation Program window.
2. Select Install EpsonNet WinAssist, then follow the
instructions on the screen to install the program.
You can also run the SETUP program in the ENWINA\Disk1
folder on the CD-ROM.
Operating system Windows XP Professional and Home
Windows Me/98
Windows 2000 Server and Professional
Windows NT 4.0 (Service Pack 3.0, or later)
CPU 486/DX (Pentium or better recommended)
Memory 64MB (for Windows Me/98)
128MB (for Windows XP/2000/NT 4.0)
Hard drive space 20MB
Starthere.book Page 8 Tuesday, March 18, 2003 5:09 PM