Filter
Top Products
Setup
This guide is designed to help you install your printer and
set up the software as quickly as possible in a Microsoft
®
Windows”’ environment. If you are not running Windows, use
procedures 1 through 8 in this guide to set up the printer. Then
see Appendix B in your Reference Guide for information on how
to install and use the EPSON
®
Control Panel for DOS.
1
System requirements
To use the printer and the software included with the printer,
you need the following:
A 386-based or higher IBM
®
PC or compatible
MS-DOS
®
3.3 or higher
Microsoft Windows 3.1 (not required if you install the
EPSON Control Panel for DOS)
4MB of RAM installed on the computer
1.3MB of hard disk space
To connect the printer to your computer, you also need to
obtain a shielded parallel interface cable.
Setup 1