Filter
Top Products
Fine-Tuning the Projector 67
Restoring the Default Settings
You can use the Reset option on any menu to restore the
factory-default settings for the settings in that menu.
To restore all the projector settings to their factory-default values,
select the
Reset menu, highlight Reset All, press Enter, and select
Yes to confirm.
Adjusting the Image
You can use the Image menu to adjust the brightness, sharpness, color,
tint, contrast, and
Auto Iris settings.
1. Press the
Menu button on the projector or remote control and
select the
Image menu. You see a screen similar to one of these:
note
When you select Reset All
in the Reset menu, it does
not reset the Input Signal,
User’s Logo, Language, or
Lamp Hours settings.
note
If you are using the HDMI
port (PowerLite 1220/
PowerLite 1260 only), you
see the menu on the left if
the signal is digital RGB
video, or the menu on the
right if the signal is
component video.
Component video/ Composite video/
S-Video
* PowerLite 1220/PowerLite 1260 only
Computer/USB display/ RGB video/
USB
*