Filter
Top Products
ActionPrinter 2250
Continuous paper:
Width
Copies
Thickness
Weight
101 to 254 mm (4 to
10 inches)
Three sheets (one original plus two copies)
0.065 to 0.25 mm (0.0026
to
0.0098
inches) total
53 to 82
g/m
2
(14 to 22 lb) for one sheet
40 to 58 g/m2 (12 to 15 lb) per sheet in multi-part
forms
l Use only two or three-part carbonless multi-part
forms and use them with the push tractor.
Note: You can use recycled Paper under normal conditions. If you notice
increases in ribbon consumption and paper jamming, use a higher grade of
paper.
Labels:
Size
101 to 254 mm (4 to 10 inches) width for backing
sheet
Thickness
63.5 x 23.8 mm (2.50 x 0.94 inches) minimum for a
label
0.07 to 0.09 mm (0.0028 to 0.0035 inches) for backing
sheet
Weight
0.16 to 0.19 mm (0.0063 to 0.0075 inches) total
68 g/m
2
(18 lb)
l
Use only continuous type labels and use them
only with the push tractor.
l Use labels only under normal temperature and
humidity conditions.
Envelopes:
Size No. 6
No. 10
Thickness
Weight
166 x 92 mm (6.5 x 3.6 inches)
240 x 104 mm (9.5 x 4.1 inches)
0.16 to 0.48 mm (0.0063 to 0.0197 inches)
45 to 75 g/m
2
(12 to 20 lb)
l
Use envelopes only under normal temperature
and humidity conditions.
l Load envelopes manually, with the longer side
inserted into the rear slot.
Printable area:
Single sheets (paper cassette and manual insertion) and envelopes
printable
area
t
C
A The minimum top margin is 8.5 mm (0.33 inches).
B
The minimum left margin is 3 mm (0.12 inches).
The minimum right margin is:
3.8 mm (0.15 inches) for the A4-size paper cassette
9.7 mm (0.38 inches) for the letter-size paper cassette
3 mm (0.12 inches) for manual insertion
However. the maximum printable width is 203 mm (8 inches).
C The minimum bottom margin is 13.5 mm (0.53 inches).
A
A
The minimum top and bottom margins above and below the perforation are
9 mm (0.35 inches).
B
The minimum left margin is 13 mm (0.51 inches).
The minimum right margin is 13.8
mm
(0.54 inches).
The maximum printable width is 203 mm (8 inches).
Mechanical
Paper-feed methods:
Ribbon:
MTBF:
Print head life:
Dimensions
and
weight:
Electrical
120 v model:
Rated voltage:
Input voltage range:
Rated frequency range:
Input frequency range:
Rated current
Power consumption:
Friction (paper cassette and manual insertion)
Push tractor
Black ribbon cartridge S015047
Life expectancy: 3 million characters at
14 dots/character
4000 power-on hours
200 million strokes/wire
Height 130 mm (5.1 inches)
Width
375 mm (14.8 inches)
Depth
252 mm (9.9 inches) without push tractor
307 mm (12.1 inches) with push tractor
Weight 4.5 kg (10 lb) without push tractor
4.9 kg (10.9 lb) with push tractor
AC 120 V
AC 103.5 to 132 V
50 to 60 Hz
49.5 to 60.5 Hz
1.1 A
Approx. 30 W (during self-test printing in draft mode
at 10 cpi)
AC 1 kV rms, 1 minute or AC 1.2 kV rms, 1 second
(between AC line and chassis)
Dielectric strength:
Environmental
Temperature: Operation:
5 to 35°C (41 to 95°F)
Storage:
-20 to 55°C (-4 to 131°F)
-
Humidity (without condensation):
Operation:
30 to 80% RH
Storage:
5 to 85% RH
Safety approvals
Safety standards:
US model:
UL1950 with D3, CSA22.2 No.220
RFl: US model:
FCC part 15
subpart
B class B
AP-2250-2
7114/92
9-Pin Printers